Table of Contents
Advertisement
Configuring The Controller – 3
The Menu Screen
To access the system Menu screen, touch the MENU function
key located on the bottom left corner of the Home screen.
Figure 3 - Menu screen.
From the Menu screen you can access virtually all
configuration, programming, operation and system information
screens available for your TouchNet controller.
To configure the TouchNet for operation, you will need to
enter some basic information about your irrigation system
which will enable the TouchNet to accurately calculate and
optimize water flow throughout the system.
System Setup
To start, select the Setup screen from the Menu screen by
touching SETUP. The Setup screen will appear as shown in
Figure 4.
6
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
