Appendix B: Specifications - Toro TouchNet NO-90-06 User Manual

Central control system for osmac
Table of Contents

Advertisement

Appendix B – Specifications
TouchNet
UL-listed, CUL-listed, SAA-certified
Input = 12 VDC, 1.0 Amp
Housing
ABS plastic suitable for installation within a sheltered
location protected from direct exposure to heat and
moisture.
Dimensions:
13-1/2" L x 4-3/4" H x 10-3/8" W
(34.3cm L x 12.1cm H x 34.9cm W)
Operating Temperature Range
0°–40°C (32°–104°F)
Motorola Paging Terminal (People Finder)
Motorola paging terminal with software level 3.31.8 or later
will interface with the TouchNet central controller via
cabling through an RS-232C port. The paging terminal will
signal the remote satellites via the PET protocol. Signaling
is unidirectional and contains no feedback from the
satellites.
TouchNet Power Supply
For Model TNO-90-06:
UL-listed Class 2 and CSA-certified.
Input = 120 VAC, 60 Hz, 18 W, ± 10%
Output = 12 VDC, 1.0 Amp
For Model TNO-90-36:
SAA-approved.
Input = 240 VAC, 50 Hz, 18 W, ± 10%
Output = 12 VDC, 1.0 Amp
Software
TouchNet, version 1.0
45
RELEASED Version
©Toro 2006-2006

Advertisement

Table of Contents
loading

Related Products for Toro TouchNet NO-90-06

This manual is also suitable for:

Touchnet tno-90-36

Table of Contents