Table of Contents
Advertisement
Special Features – 6
Removing The Cancel Command
After the cancel command has been given, it can be manually
removed enabling the automatic watering schedule to resume
as programmed.
To accomplish this, a flow management calculation must be
performed on the Water Window screen
From the system Menu screen touch WATER WINDOW. On the
Water Window screen, touch the time display box adjacent to
CALCULATED END TIME. The watering schedule will be
calculated by the HydroGuard flow manager.
Figure 31 - The Water Window screen.
During the calculation process, a screen will appear stating
"CALCULATING STARTS PLEASE WAIT". The time required to
complete the calculations is determined by the size of the
watering schedule data base. In some cases, it may require
more than 30 minutes to complete this process.
Upon completion of the calculation, all watering sequences
scheduled to start (after the time of day the calculation was
performed) will operate automatically as programmed.
35
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
