Table of Contents
Advertisement
3
Configuring The Controller
The Home Screen
When the TouchNet controller is first powered-up, you will be
greeted with the Home screen as shown below. The Home
screen is used to identify the controller, the type of Toro
satellite it controls, and the version of the TouchNet software.
Figure 2 - Home screen.
As you navigate through the various TouchNet screen displays,
you can return to the Home screen by touching the TORO key
displayed in the lower left corner of the Menu screen.
The Home screen has no active programming controls but
does provide six standard function keys - MENU, RAIN,
CANCEL, MANUAL, ADJUST and STARTS. The function keys
are found on most TouchNet screen displays. In some cases
they will change depending on individual screen needs. The
RAIN and CANCEL keys implement their labeled functions.
The remaining function keys enable you to select other screen
displays.
The TouchNet for OSMAC can be fully programmed and
operated using only the touch control areas on the screen
display.
5
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
