Set Current Date; Set Day Change Time - Toro TouchNet NO-90-06 User Manual

Configuring The Controller – 3
Figure 9 - The Setup screen with the current time.
Programming the information for all the other items on the
Setup screen is made in a similar manner as setting the time.

Set Current Date

Set the date by touching the box displaying the date, then enter
the information on the pop-up keypad as prompted.
The Date also has a Mode option. The normal display is
Month/Day/Year. You can change the display to read
Day/Month/Year by touching the MODE box.

Set Day Change Time

For irrigation scheduling purposes, the day change occurring at
midnight may be inconvenient because watering is usually
required for some period before and after midnight. This can
be awkward when scheduling active watering days.
The Day Change time option enables the 24-hour day
reference to be shifted forward or backward so all watering
required per day can then be completed without a day change
occurring during operation.
In our example shown in Figure 9, the Day Change time is set
at 7:00 AM. To set the Day Change time, touch the display box
adjacent to DAY CHANGE, then use the pop-up keypad to
enter the desired time.
When selecting a Day Change time, a system alarm will occur
if the day change time occurs before the irrigation cycle end
time. Refer to "System Alarms", page 40 and "The Water
Window Screen", page 38 for additional information.
10
RELEASED Version ©Toro 2006-2006