Table of Contents
Advertisement
Configuring The Controller – 3
key 4 but meant to touch the 7 key, touching DEL would
remove number 4 so the correct number could be selected.
the underlying screen. You can discontinue using the keypad
at any time by touching the ESC key.
Figure 6 - Entering the current hour.
In the example shown above, we will adjust the current time of
1:10 PM to Daylight Savings Time. We have selected 2 from the
keypad when prompted "Hours?". We then touch the Enter
key.
If you attempt to enter information into the TouchNet which
cannot be accepted, you will be prompted by the message
"Bad Input". For example, if "0" was entered in the above
example, the prompt "Bad Input" would appear. A valid
number could then be selected.
The Delete key is used to remove information being
selected on the keypad. For example, if you touched
Touching the Escape key either selects the next
keypad prompt or exits the keypad returning you to
Touching the Enter key places the keypad selection
into the TouchNet memory.
8
RELEASED Version
1
2
©Toro 2006-2006
Advertisement
Table of Contents
