Set Watering Sequence Starts; Sequence Start Number; Set Start Time - Toro TouchNet NO-90-06 User Manual

Programming The Controller – 4
Repeat the programming process for each station of each
<< >>
satellite in your system. Use the and scroll
STA STA
<< >>
keys to access the stations, and the and scroll
SAT SAT
keys to access the satellites.
When all satellite stations have been programmed, watering
sequence starts schedules must be established.

Set Watering Sequence Starts

From the system Menu screen, touch STARTS. The watering
sequence Starts screen will appear as shown in Figure 24.
Information entered on the Starts screen determines the time
when a watering sequence will start, the active day schedule
for the sequence, and the order in which the selected programs
will operate. Up to 12 sequence starts can be programmed.
Figure 24 - The watering sequence Starts screen.

Sequence Start Number

First, select the sequence start time number by touching the
box next to STRT #, then use the pop-up keypad to enter the
desired number from 1 to 12.
The watering sequences are prioritized by the start number
assigned. Number 1 is the highest priority and 12 is the lowest.
A sequence with a higher priority start number will interrupt a
lower priority sequence start number during operation.

Set Start Time

Next, touch the box displaying the start time (the default time
is 12:00 AM), then enter the desired start time using the pop-up
keypad.
26
RELEASED Version ©Toro 2006-2006