Table of Contents
Advertisement
If the Calculated End Time exceeds the Day Change time
and/or the End Time Limit, an alarm will be generated. Several
options are available to resolve the problem:
• Change the earliest sequence start time to an earlier time.
• Extend the End Time Limit (which may also require
extending the Day Change time).
• Decrease station run time on the Adjust screen until the
Calculated End Time is within the watering window.
• Touch the WATER ANYWAY box, which allows the system to
continue watering past the End Time Limit.
• Touch the STOP WATER AT LIMIT box, which will cause all
irrigation to stop at the end time limit. (This selection will
activate an alarm tone.)
System Alarms
The Alarms screen, as shown in Figure 36, will be displayed
automatically along with a periodic beep tone alerting you to
system operating problems and/or important information
regarding system operation.
A checkmark next to the alarm description indicates the cause.
Touching the QUIET ALARM box will turn off the beep tone
until another alarm occurs.
Figure 36 - The system Alarms screen.
Once the alarm has been resolved, the checkmark will
disappear and the TouchNet will resume normal operation.
The Alarm screen will remain displayed until another screen is
selected.
Special Features – 6
40
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
