Table of Contents
Advertisement
Configuring The Controller – 3
Set Update Time
The Update Time determines when the TouchNet will
automatically calculate the complete watering duration for the
active watering day.
To set the Update Time, touch the UPDATE TIME display box,
then use the pop-up keypad to enter the desired time.
The Update Time should be set to a minimum of 1 hour prior
to the earliest sequence start time. This enables the TouchNet
to perform the required calculations and enables you to make
any necessary adjustments to the watering schedule before
watering begins. Refer to "The Water Window Screen",
page 38 for more information regarding Update Time.
Set Flow Units
The next item on the Setup screen is Flow Units. The TouchNet
can be programmed to operate in either GPM (Gallons Per
Minute) or LPM (Liters Per Minute) measurement systems.
The default value is GPM. To select LPM touch the GPM box.
The Flow Units selected on this screen will be displayed on all
screens where flow units are shown.
The Flow Units option is used as a label only and has no unit
measurement conversion function. Selecting the alternate
flow units will not convert the numeric values previously
entered. For example, 100 GPM will be displayed as 100 LPM
if the flow units are changed from GPM to LPM.
Show Days As
This portion of the Setup screen enables you to select how the
watering day schedules will be displayed.
Days can be shown as letters (S M T W T F S, Sunday,
Monday, etc.), or as numbers (1 2 3 4 5 6 7, 1 = Sunday,
2 = Monday, etc.).
The default display is the LETTERS format. To select the
NUMBERS format, touch the LETTERS box.
This completes the general setup procedure. Return to the
Menu screen by touching the MENU function key.
11
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
