Table of Contents
Advertisement
5
Manual Operation
Select MANUAL from the system Menu screen. The Manual
screen will appear as shown in Figure 28.
To run a watering program manually, select the program by
touching the PROGRAM name box. The Select Program screen
will appear. Touch the program you wish to operate and press
OK.
Figure 28 - The Manual operation screen.
Next, select a specific satellite by touching the SATELLITE
number box and entering its address number from the pop-up
keypad. To select all satellites, enter "0".
To run a syringe cycle, touch the SYRINGE time box and enter
a syringe run time (1–30 minutes) using the pop-up keypad.
Press START to begin watering.
To cancel watering at any time, press STOP.
31
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
