Table of Contents
Advertisement
Programming The Controller – 4
Defining Program Default Values
The next step is to define the irrigation programs default
values. The information entered on this screen will be
transferred to the Satellite Stations setup screen to help simplify
and expedite the programming process.
Select PROGRAMS from the system Menu screen. The
Programs screen will appear as shown in Figure 11.
Figure 11 - Programs screen.
The Programs screen enables you to select a specific name for
each program, and define a run time and flow rate for the
typical stations within the program.
Naming Programs
By default, the programs are named Program 1, Program 2, etc.
For your convenience, you may rename the programs as
desired utilizing up to 12 characters and spaces for each name.
In a golf application for example, typical program names
would be Greens, Tees, Fairways, etc.
17
RELEASED Version
©Toro 2006-2006
Advertisement
Table of Contents
