Samsung CLX-9252 Series Service Manual page 439

Step
7 Connector is connected properly with no
bent.
8 Connectors on the scanner board are
connected properly.
9 Connectors of the CCD unit are connecte
properly.
10 The problem is eliminated as checked wit
image on a test pattern produced.
11 The problem is eliminated after the I/F
connection cable has been changed.
Service Manual
7. Troubles
Check item
7-1
shooting
pins Reconnect.
Reconnect.
ed Reconnect.
th the Change I/F connection cable.
Change the scanner board.
42
Action
SAMSUNG ELECTRONICS