3.3.2 OPE PBA and LCD panel
Perform the following procedure to remove the OPE P
1. Remove the Rail cover after removing 1 screw.
[A]
2. Remove 4 screws, and then shift the cover-rail [B]
in the direction of the arrow.
Service Manual
3. Replacemen
[B]
nt Procedures
PBA and LCD panel from the OPE assembly.
3. Remove 2 screws, and shift the cover-rail [B] in
the direction of the arrow.
th di
ti
f th
4. Remove 2 screws.
3-1
12
[B]
SAMSUNG ELECTRONICS