Samsung CLX-9252 Series Service Manual page 385

● Code :
S1-2510
S1-2511
S1-2523
S1-2540
● Symptom / Cause :
MSOK has the problem.
#S1-2510 : MSOK module was broken.
#S1-2511 : Doesn t install the MSOK or MSOK modul #S1-2511 : Doesn't install the MSOK or MSOK modul
#S1-2523 : MSOK PPM information error
#S1-2540 : MSOK nCRUM에 data error
● Troubleshooting method :
1. Remove the rear cover and main board plate. 1. Remove the rear cover and main board plate.
2. Is the MSOK installed properly? Install the MSOK p
MSOK
3. Replace the main
Service Manual
● Error message :
MSOK System Failu
MSOK System Failu
PPM data is incorre
MSOK Failure: #S1-
board(JC92-02580A(for 9352) / J
7. Troubles shooting
:
ure #S1-2510 : Turn off then on.
ure: #S1-2511. Turn off then on.
ct. Call for service & change MSOK.
-2540. Call for service & change MSOK.
e was broken. e was broken
properly.
JC92-02581A(for
7-8 88
9252))
SAMSUNG ELECTRONICS