Table of Contents
Advertisement
● Code :
A1-5213
A1-5313
A1-5413
A1-5513
● Symptom / Cause :
● Symptom / Cause :
Toner is not supplied normally.
● Troubleshooting method :
1. Specially when toner cartridge is initial install time
seal of toner cartridge is removed.
2. Open the front cover. Check if the toner supply pipe
3. Turn the machine off then on. If the problem persist
4. Enter SVC mode. Select the toner supply motor tes
(Diagnostics > Engine Diagnostics > Engine Tes
- 100-0380 Toner Supply Motor Yellow
100 0380 Toner Supply Motor Yellow
- 100-0390 Toner Supply Motor Magenta
- 100-0400 Toner Supply Motor Cyan
- 100-0410 Toner Supply Motor Black
5. If the motor is not operational, measure the motor p
- At motor operation,
Red wire : 0V
Black wire : 24V
Service Manual
7. Troubles
shooting
● Error message :
:
Actuator Motor Failu
ure #A1-5213: Turn off then on.
Actuator Motor Failu
ure #A1-5313: Turn off then on.
Actuator Motor Failu
ure #A1-5413: Turn off then on.
Actuator Motor Failu
ure #A1-5513: Turn off then on.
(total printed pages is under 1,000 page), check if the
e is blocked. If the seal is not removed, remove it.
ts, check the followings.
st.
st Routines)
power with DVM.
7-3
31
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
