Fuser Belt - Samsung CLX-9252 Series Service Manual

3.5.7 Fuser Belt

Perform the following procedure to remove the Fuser B
[B]
[B]
Service Manual
3. Replacemen
[A]
nt Procedures
Belt from the Fuser Unit.
1. Remove the Heat roller (Refer to 3.5.8)
2. Remove the Bracket rear [A] after removing 4
screws.
3. Remove 2 baffle springs.
CAUTION
Be careful not to lose the springs. They are easily
released.
4. Remove the Bracket top assembly [B] after
removing 3 screws and 3 connectors.
3-3 35
[ ] g
SAMSUNG ELECTRONICS