Table of Contents
Advertisement
● Code :
C5-1531
C5-1551
● Symptom / Cause :
y
The machine can not detect the resistance of the trans
● Troubleshooting method :
1. Open and close the front cover.
1. Open and close the front cover.
2. Turn the machine off and on.
3. Check if the ITB unit is installed properly.
- Open the front cover. → Remove the WTB. → O
4. Open and close the side cover.
5.
5.
If the problem persists, open the side cover and c
If the problem persists, open the side cover and c
- Check if the ROLLER-TRANSFER2(JC95-01038
- Check if the HV terminal of the ROLLER-TRANS
Service Manual
7. Troubles
shooting
● Error message :
ITB Unit Failure #C5
5-1531: Turn off then on.
ITB Unit Failure #C5
5-1551: Turn off then on.
sfer roller 2.
Open the inner cover. → Check ITB installation.
check the followings.
check the followings.
8A) is installed.
SFER2 is missed/deformed/contaminated.
7-5
56
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
