Table of Contents
Advertisement
• Diagnostics > Color Management > Auto Col
Purpose
Operation
Procedure
Verification
Specification
Specification
Reference
Service Manual
To minimize difference in imag
1. Run ID Sensor Calibration
2. Print out a test pattern for s
designed for A3 or ledger s
designed for A3 or ledger s
in a tray.
3. When a test pattern is print
4. The arrow in left top of the
scan glass and to be place
5. Run the pattern scanning b
6. After scanning, run Normal
7. Exit ID Sensor Calibration m
Print out a test job and make su
has disappeared.
N/A
N/A
N/A
4.Servic
ce Mode
lor Tone Adjustment > ID Sensor Calibration
e quality between sets
sensor calibration. Note that the test pattern is
size. Make sure that required media size is loaded
size Make sure that required media size is loaded
ted out, locate the pattern on the scanner.
test pattern need s to head to the left-top side of
d face down.
by pressing "OK" button.
l TRC by pressing "OK" button.
mode.
ure the difference in image quality between sets
4-5
50
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
