7.3.10 Blank copy , Black copy
A. Typical faulty images
B. Troubleshooting procedure
Step
1
A blank copy occurs.
A black copy occurs
2
Coupling of imaging unit drive mechanism
installed properly.
3
The OPC drum charge corona voltage co
of OPC drum ground contact of the imagi
unit is connected properly.
4
Connector is connected properly.
5
5
Connector is connected properly
C
6
The problem has been eliminated through
check of step 5.
Service Manual
Blank copy
Check item
t
i
t d
7. Troubles
shooting
Black copy
Check LSU connector for proper connection.
Check HVPS connector for proper
connection, especially, Corona Charger and
Grid Voltage
m is
Check and correct drive transmitting
coupling. Change imaging unit.
ontact
Check, clean, or correct the contact.
ng
Reconnect.
l
Reconnect the cable between video control
R
board and engine control board
h the
Change high voltage unit.
Change printer control board
Change LSU.
7-1
41
Action
t th
bl
b t
To be continued on next page...
SAMSUNG ELECTRONICS
id
t l