Scan Area Adjustment - Samsung CLX-9252 Series Service Manual

4.5.4.3. Scan Area Adjustment

• Diagnostics > Adjustment > Scan Area Adjus
Purpose
Operation Operation
Procedure
Verification
Specification
Reference
Service Manual
To correct image position and m
1. Locate the A3 Scanner A/S 1. Locate the A3 Scanner A/S
arrows need to head to the
2. Press "OK" button. Automa
automatically calculate the p
3. The new value set to the tab
1. Scan the Scanner A/S Char
from the scan glass.
2. To check the image positio
the chart to the copy.
3. To check the magnification,
copy.
ⓐ,ⓑ : 10 ± 1.5mm
ⓒ : 400 ± 1.5mm
4.Servic ce Mode
stment > Automatic Adjustment
magnification of scanned images automatically.
Chart at the scan glass . Note that "Lead Edge" Chart at the scan glass . Note that Lead Edge
left side of scan glass and to be placed face down.
atic scanning will occur ,and the system will
proper value based on scanning result of the chart .
ble.
rt and send it to a PC. Scanning must be occur
g p n, compare the position of scale marks (ⓐ,ⓑ) of p
compare the length of line ⓒ of the chart to the
4-3 36
p
SAMSUNG ELECTRONICS
( )