Value For Object X - ABB tacteo KNX Product Manual

11.5.9.5

Value for object x

The possible options and setting limits depend on parameter "Object type for object x".
Options for selection "1 bit":
Options:
Options for selection "1 byte 0-100%":
Options:
Options for selection "1 byte 0-255":
Options:
Options for selection "2-byte float":
Options:
Options for selection "2-byte signed":
Options:
Options for selection "2-byte unsigned":
Options:
Options for selection "4-byte float":
Options:
Options for selection "4-byte signed":
Options:
Options for selection "4-byte unsigned":
Options:
The parameter is used to set the value that is sent at a multiple operation of the button. For the
single to five button actuations an own value can be set for each, depending on the number of
disabled communication objects.
Note
The parameter can only be set if the "Object type for object x" parameter is set
on "1 bit" and parameter "Function for object type 1-bit for object x" is set on
"Send value".
Product manual 2CKA001473B9488
Description of application and parameters
Off
One
Setting option from 0 to 100 (%)
Setting option from 0 to 255
Setting option from -671088.64 to 670760.96
Setting option from -32768 to +32767
Setting option from 0 to 65535
Setting option from -4000000 to 4000000
Setting option from -2147483648 to 2147483647
Setting option from 0 to 4294967295
Application "Function block x"
│98