Table of Contents
Advertisement
11.5.2
Application - 1-button switching
The application makes it possible to switch a light via a button.
The following communication object is available:
"Sx: switching"
■
The application can differentiate between the press and the releasing of a button. When
actuated and released a switching telegram is sent out each time.
In each case, the application makes a separate set of parameters and communication objects
available in function block x for both buttons. The second button of each function block can be
occupied with an additional button function.
Note
The parameters for application "1-button switching" can be called up via general
parameters.
Note
The number (S1 - Sx) of the object depends on the function block and the button
number.
11.5.2.1
Reaction on rising edge
Options:
Deactivated:
■
–
No telegram is sent at the press of the button.
Off:
■
–
The "Off" telegram is sent at the press of the button (at rising edge).
On:
■
–
The "On" telegram is sent at the press of the button (at rising edge).
Alternating on/off:
■
–
"On" and "Off" are sent alternately at the press of the button.
Application "1-button value switching" can differentiate between the press and the releasing of
the button. A press is defined as "Rising edge" and the releasing as "Falling edge".
The parameter is used to specify whether an On or Off telegram is sent on the bus at a rising
edge via the 1-bit communication object "Sx: switching". A further option can be specified as to
whether the switching telegrams are sent alternately. This means that after "On" is sent, "Off" is
sent at a renewed press of the button. After it is pressed again, "On" is sent.
Product manual 2CKA001473B9488
Description of application and parameters
Deactivated
Off
On
Alternating on/off
Application "Function block x"
│64
Advertisement
Table of Contents
