Reaction On Rising Edge - ABB tacteo KNX Product Manual

11.5.7.2

Reaction on rising edge

Options:
No reaction:
■
– No telegram is sent at the press of the button.
Value 1:
■
– Value 1 is sent at the press of the button (at rising edge).
Value 2:
■
– Value 2 is sent at the press of the button (at rising edge).
Alternating value 1/value 2:
■
– Value 1 and value 2 are sent alternately at the press of the button.
Application "1-button value transmitter, 2 objects" can differentiate between the press and the
releasing of a button. A press is defined as "Rising edge" and the releasing as "Falling edge".
The application makes two separate communication objects available for the rising and falling
edge of a button.
The parameter is used to specify whether a telegram with value 1 or value 2 is sent on the bus
at a rising edge via communication object "Sx: switching (rising edge)". A further option can be
specified as to whether the telegrams are sent alternately. This means that after value 1 has
been sent, value 2 is sent at a renewed press of the button. After it is pressed again, value 1 is
again sent out.
Note
Parameter "Value 1 for rising edge" and "Value 2 for rising edge" is used to
specify the values that are to be sent.
Product manual 2CKA001473B9488
Description of application and parameters
No reaction
Value 1
Value 2
Alternating value1/value2
Application "Function block x"
│86