Operating Mode - ABB tacteo KNX Product Manual

11.5.11.2

Operating mode

The possible options depend on parameter "Object type for output".
Options for object type "1 bit":
Options:
Comfort:
■
– Switching signal "On" is sent via the 1-bit object and a linked RTC switches over into
comfort mode.
Standby:
■
– Switching signal "On" is sent via the 1-bit object and a linked RTC switches over into
standby mode.
ECO:
■
– Switching signal "On" is sent via the 1-bit object and a linked RTC switches over into
ECO mode.
Frost/heat protection:
■
– Switching signal "On" is sent via the 1-bit object and a linked RTC switches over into
frost/heat protection mode.
The parameter is used to specify the operating mode which is sent via communication object
"Sx: operating mode" at the press of the button.
Product manual 2CKA001473B9488
Description of application and parameters
Comfort
Standby
ECO
Frost/heat protection
Application "Function block x"
│103