ABB tacteo KNX Product Manual page 36

Function block x —
2-button switching
Function block x —
2-button dimming
Function block x —
2-button blind
Function block x —
2-button value
transmitter
Product manual 2CKA001473B9488
Description of application and parameters
Enable object
Object value enable object
Enable object after return of voltage
Send comfort object
Send Eco object
Send frost object
Working mode of the buttons for switching
Duration of long operation
Manner of dimming
Step size for step-wise dimming (%)
Dimming function
Working mode of the buttons for switching
Working mode of the buttons for dimming
Dimming stop telegram
Cyclic sending of the dimming telegrams
Duration of telegram repetition
Duration of long operation
Object type
Working mode of the buttons
Value for position down (%)
Value for position up (%)
Value for slats position down (%)
Value for slats position down (%)
Object type
Working mode of the buttons
Value 1
Overview of functions
Deactivated / activated
Normal / inverse
Disabled / enabled
Deactivated / activated
Deactivated / activated
Deactivated / activated
1st button on - 2nd button off
/ 1st button off - 2nd button
on / alternating on/off
00.300 - 03.000 (ss.fff)
Start-stop dimming / step-
wise dimming
1.56 / 3.13 / 6.25 / 12.5 / 25 /
50
Short operation dimming,
long operation switching /
short operation switching,
long operation dimming
1st button on - 2nd button off
/ 1st button off - 2nd button
on / alternating on/off
1st button brighter, 2nd
button darker / 1st button
darker - 2nd button brighter
Dimming stop is not sent /
dimming stop is sent
Deactivated / activated
00.100 - 05.000 (ss.fff)
00.300 - 03.000 (ss.fff)
1 bit / 1 byte 0-100%
1st button up / 2nd button
down /
1st button down - 2nd button
up
0 - 100 (%)
0 - 100 (%)
0 - 100 (%)
0 - 100 (%)
1 bit / 1 byte 0-100% / 1 byte
0-255 / 2 byte float / 2 byte
signed / 2 byte unsigned / 4
byte float / 4 byte signed / 4
byte unsigned
1st button value 1 - 2nd
button value 2 / 1st button
value 2 - 2nd button value 1 /
alternating value1/value 2
Setting dependent on object
type
│36