Table of Contents
Advertisement
11.5.3.2
Working mode of the buttons for switching
Options:
Deactivated:
■
–
No command is sent at the press of the button.
Off:
■
–
The "Off" command is sent at the press of the button.
On:
■
–
The "On" command is sent at the press of the button.
Alternating on/off:
■
–
"On" and "Off" are sent alternately at the press of the button.
The parameter is used to specify whether an On or an Off command is sent on the bus via 1-bit
communication object "Sx: switching" when the button is pressed.
A further option can be specified as to whether the switching commands are sent alternately.
This means that after "On" is sent, "Off" is sent at a renewed press of the button. After it is
pressed again, "On" is sent.
11.5.3.3
Working mode of the buttons for dimming
Options:
Darker:
■
–
The "Dim darker" command is sent at a long press of the button.
Brighter:
■
–
The "Dim brighter" command is sent at a long press of the button.
Alternating brighter/darker:
■
–
"Dim darker" and "Dim brighter" are sent alternately at a long press of the button.
The parameter is used to specify whether a telegram with the "Dim brighter" or "Dim darker"
command is sent on the bus via the 3-bit communication object "Sx: relative dimming" at a long
press of the button.
A further option can be specified as to whether the dimming telegrams are sent alternately at
each long press of the button. This means that after "Dim brighter" is sent, "Dim darker" is sent
at a renewed press of the button. After it is pressed again, "Dim brighter" is sent.
Product manual 2CKA001473B9488
Description of application and parameters
Deactivated
Off
On
Alternating on/off
Darker
Brighter
Alternating brighter/darker
Application "Function block x"
│67
Advertisement
Table of Contents
