Application - 1-Button Value Transmitter, 2 Objects - ABB tacteo KNX Product Manual

11.5.7

Application - 1-button value transmitter, 2 objects

At a press and release of the button the application makes it possible to send different, preset
values via separate communication objects.
The following communication objects are available:
"Sx: switching (rising edge)"
■
"Sx: switching (falling edge)"
■
The application can differentiate between the press and the releasing of a button (rising/falling
edge). The telegrams for the rising and falling edge can have different bit sizes. This, for
example, allows a switching function and a floating point value to be sent.
In each case, the application makes a separate set of parameters and communication objects
available in function block x for both buttons. The second button of each function block can be
occupied with an additional button function.
Note
The parameters for application "1-button value transmitter, 2 objects" can be
called up via general parameters and extended parameters.
Note
The number (S1 - Sx) of the object depends on the function block and the button
number.
Product manual 2CKA001473B9488
Description of application and parameters
Application "Function block x"
│84