Table of Contents
Advertisement
11.5.18 Application - LED function
The application can be used to configure the button LEDs for the status or function display.
The following communication objects are available:
"Lx: Status LED"
■
"Lx: Day/night mode"
■
"Lx: Alarm"
■
"Lx: Scene storage"
■
The LED of button x can light up with two different colours and brightness levels. The LED can
also flash for alarm display and/or scene storage display.
In each case, the application makes a separate set of parameters and communication objects
available in function block x for both LEDs. The second button of each function block can be
occupied with an additional button function.
Note
The parameters for application "LED function" can be called up in each function
block via general parameters and extended parameters.
Note
The number (S1 - Sx) of the object depends on the function block and the button
number.
11.5.18.1
Operating mode
Options:
Status illumination:
■
–
The LED displays the device status with different colours.
Function illumination:
■
–
The LED displays the device functions with different colours.
The parameter is used to specify whether the LED displays the current device status or the
selected device function with a colour.
If the operating mode "Status illumination" is selected, the LED has the 1-bit or 1-byte
communication object "Lx: status LED". If a telegram is received via the status object, the LED
lights up in the colour of the received value.
If operating mode "Function illumination" is selected, the colour for the configured button
function (e.g. light, blind or scene) can be firmly set via parameter "Colour of function
illumination".
Product manual 2CKA001473B9488
Description of application and parameters
Status illumination
Function illumination
Application "Function block x"
│129
Advertisement
Table of Contents
