Reaction On Rising Edge - ABB tacteo KNX Product Manual

11.5.6.2

Reaction on rising edge

Options:
No reaction:
■
– No telegram is sent at the press of the button.
Value 1:
■
– Value 1 is sent at the press of the button (at rising edge).
Value 2:
■
– Value 2 is sent at the press of the button (at rising edge).
Alternating value 1/value 2:
■
– Value 1 and value 2 are sent alternately at the press of the button.
Application "1-button value transmitter" can differentiate between the press and the releasing of
the button. A press is defined as "Rising edge" and the releasing as "Falling edge". Only one
communication object is available for both edges.
The parameter is used to specify whether a telegram with value 1 or value 2 is sent on the bus
at a rising edge via communication object "Sx: switching". A further option can be specified as to
whether the telegrams are sent alternately. This means that after value 1 has been sent, value 2
is sent at a renewed press of the button. After it is pressed again, value 1 is again sent out.
Note
Parameter "Value 1" and "Value 2" is used to specify the values that are to be
sent.
Product manual 2CKA001473B9488
Description of application and parameters
No reaction
Value 1
Value 2
Alternating value1/value2
Application "Function block x"
│81