Value For Slats Position Down (%) - ABB tacteo KNX Product Manual

11.5.14.6

Value for slats position down (%)

Options:
The parameter is used to set the position to which the slats of the linked blind are to open. The
associated 1-byte "Sx: slat position" communication object must hereby be connected with the
1-byte slat position object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0 % = slats completely open.
■
100 % = slats completely closed.
■
Note
The parameter is only adjustable if the "object type" parameter is set to "1 byte 0
- 100%".
11.5.14.7 Value for slats position down (%)
Options:
The parameter is used to set the position to which the slats of the linked blind are to close. The
associated 1-byte "Sx: slat position" communication object must hereby be connected with the
1-byte slat position object of the blind actuator.
Percentage values can be set in steps of 1%. Meaning of the percentage values:
0 % = slats completely open.
■
100 % = slats completely closed.
■
Note
The parameter is only adjustable if the "object type" parameter is set to "1 byte 0
- 100%".
Product manual 2CKA001473B9488
Description of application and parameters
Setting option from 0 to 100 (%)
Setting option from 0 to 100 (%)
Application "Function block x"
│119