Table of Contents
Advertisement
11.3.2
Proximity - Application
Options:
Inactive:
■
–
Application is not active.
Proximity application:
■
–
Application is active.
The Application is used to specify whether it is recognized when the user approaches the
device. The application can be used, for example, that the display and LEDs first switch on
when the user is located in front of the device.
The following communication objects are available:
"NARX: proximity"
■
"NARX: internal proximity status"
■
The communication objects are enabled via the associated parameters.
Note
The following parameters can only be adjusted when the function "Proximity" is
set on "Proximity application".
The parameters for application "Proximity" can be called up via general
parameters.
11.3.2.1
External proximity via object
Options:
Deactivated:
■
–
The communication object is not enabled.
Activated:
■
–
The communication object is enabled.
A 1-bit communication object "NARX: proximity" can be enabled with this parameter. If an On
telegram is received via this object, the proximity function is active. If an Off telegram is
received via this object, the proximity function is disabled.
Product manual 2CKA001473B9488
Description of application and parameters
Inactive
Proximity application
Deactivated
Activated
Application "Device settings"
│47
Advertisement
Table of Contents
