Shift Weight Inspection; Button To Tower Clearance Inspection - Polaris RZR XP 1000 2014 Service Manual

Table of Contents

SHIFT WEIGHT INSPECTION

1. Remove shift weight bolts and weights. Inspect the

contact surface of each weight. The surface should

be smooth and free of dents or gall marks. Inspect

the weight pivot bore and bolts for wear or galling. If

weights or bolts are worn or broken, replace in sets

of three with new bolts and nuts.

The clutch assembly is a precisely balanced unit. Never

replace parts with used parts from another clutch

A damaged shift weight is usually caused by a

damaged or stuck roller in the spider assembly. See

"Drive Clutch Roller Pin and Button Service".

BUTTON TO TOWER CLEARANCE

1. Inspect the button to tower clearance as shown.

Replace the drive clutch if clearance is beyond

specification.

Button to Tower Clearance:

.000-.012" (.000-.304 mm)

2. Inspect the tower sheave surfaces. Replace the drive

clutch if worn, damaged or cracked.

9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual

Table of Contents