PROP SHAFT SERVICE
FRONT PROPSHAFT REMOVAL
1. Remove the center console.
q
Cap
w
Shifter
2. Locate the prop shaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
Discard roll pin. Push the front prop shaft rearward to
remove it from the front gearcase input shaft.
Roll Pin Removal Tool:
PN 2872608
NOTE
Right front wheel can be removed to gain better access
to the propshaft roll pin.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
e
Torx Screw
r
Push Rivet
3. Slide the front propshaft
and remove it from the vehicle.
4. Proceed to Front Prop Shaft Installation, page 7.28.
FINAL DRIVE
t
y
off the rear propshaft
7.27
7