Oil Pressure Test - Polaris RZR XP 1000 2014 Service Manual

ENGINE / COOLING SYSTEM

OIL PRESSURE TEST

1. Attach the Oil Pressure Gauge Adapter (PU-50565)
to the Oil Pressure Gauge (PV-43531).
Oil Pressure Gauge Adapter: PU-50565
Oil Pressure Gauge: PV-43531
2. Remove the seats, engine service panel, and divider
panel heat shield.
3. Clean the area around the main oil gallery plug ,
located in the upper crankcase on the MAG side of
the engine.
4. Remove the crankcase gallery plug
oil pressure adapter.
3.4
5. Start engine and allow it to reach operating
Test results are based on the use of the recommended
engine oil (Polaris PS-4 or PS-4 Extreme Duty) at
operating temperature, and may vary considerably if
6. Upon assembly, torque the crankcase gallery plug to
q
and insert the
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
temperature, monitoring gauge indication.
NOTE
any other oil is used or if engine is not up to
temperature.
Oil Pressure Specification (Engine Hot):
Minimum @ 1200 RPM: 10 PSI
Minimum @ 7000 RPM: 40 PSI
specification.
TORQUE
Crankcase Oil Gallery Plug:
11 ft-lbs (15 Nm)
© Copyright Polaris Industries Inc.