Engine Cooling System; Engine Cooling System Specifications; Cooling System Pressure Test - Polaris RZR XP 1000 2014 Service Manual

ENGINE COOLING SYSTEM

ENGINE COOLING SYSTEM
SPECIFICATIONS
Cooling System Specifications
CONDITION
Room Temperature
Thermostat Open
Fan Off
Fan On
Thermostat Full Open
Engine Temperature
Overheat Indicator
Engine Protection
Ignition Misfire
Engine Protection
Shutdown
ITEM
XP
Cooling System
Capacity
XP4
Pressure Cap Relief
Polaris 50/50 Extended Life Anti-freeze
2880514 (quart)
2880513 (gallon)
Recommended Coolant
Use only high quality antifreeze/coolant mixed with
distilled water in a 50/50 or 60/40 ratio, depending on
freeze protection required in your area.
CAUTION: Using tap water in the cooling system will
lead to a buildup of deposits which may restrict coolant
flow and reduce heat dissipation, resulting in possible
engine damage. Polaris Premium 60/40 Antifreeze/
Coolant is recommended for use in all cooling systems
and comes pre-mixed, ready to use.

COOLING SYSTEM PRESSURE TEST

1. Remove the hood from the front cab.
WARNING
Never remove pressure cap when engine is warm or
hot. The cooling system is under pressure and serious
burns may result. Allow the engine to cool before
servicing.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
COOLANT TEMP °F (°C)
68° F (20° C)
180° F (82° C)
192° F (89° C)
198° F (92° C)
203° F (95° C)
233° F (112° C)
236° F (113° C)
257° F (125° C)
SPECIFICATION
5.36 qt (5.0 L)
6.08 qt (5.75 L)
13 PSI
ENGINE / COOLING SYSTEM
2. Remove pressure cap and pressure test the cooling
system using a commercially available pressure
tester.
3. The system must maintain 10 psi for five minutes or
longer. If pressure loss is evident within five minutes,
check the filler neck, radiator, hoses, clamps and
water pump weep hole for leakage.
3
3.15