Shock Compression Adjustment (Fox®) - Polaris RZR XP 1000 2014 Service Manual

MAINTENANCE
SHOCK COMPRESSION ADJUSTMENT (FOX®)
The compression damping adjustment is located on the shock 'Piggyback' reservoir of each shock. Damping
adjustments can be made without using any tools.
When the adjuster knob is turned counter-clockwise until it stops, the damping is in the fully open position (softest).
Turn the adjuster knob clockwise to increase compression damping. Turn the adjuster knob counter-clockwise to
decrease compression damping.
The recommended factory setting for the front and rear shocks are provided in the following compression adjustment
SETTING
Softest
Factory
Firmest
FRONT
SETTING
Softest
Factory
Firmest
The rear shock adjuster can be found on the remote reservoir. Clockwise will increase damping and counter-clockwise
will decrease damping.
2.36
NOTE
NOTE
tables.
FOX 2.5" Front Shock
COMPRESSION DAMPING
Full counter-clockwise position
12 clicks CCW from full firm setting/full clockwise
Full clockwise position
REAR
FOX 3.0" Rear Shock
COMPRESSION DAMPING
Full counter-clockwise position
12 clicks CCW from full firm setting/full clockwise
Full clockwise position
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.