Pvt Assembly (2016) - Polaris RZR XP 1000 2014 Service Manual

PVT SYSTEM
13. Loosen the hose clamp
the inner clutch cover. Disengage the hose from the
inner clutch cover.
14. Loosen hose clamps
to inner clutch cover. Disengage hose from the
cover.
15. Remove the seven bolts
cover to engine and transmission. Remove inner
clutch cover.
5.12
e
attaching PVT inlet duct to
r
that attach clutch outlet duct
t
that retain inner clutch
PVT ASSEMBLY
1. Inspect inner clutch cover. Replace if cracked or
damaged.
2. Inspect the seal on the transmission input shaft.
Replace if damaged.
3. Inspect inner clutch cover seal
Replace if cracked, torn or damaged.
4. Apply silicone around all seven screw holes on the
inner clutch cover.
IMPORTANT
DO NOT apply silicone on drive and driven shaft
inner cover donuts.
5. Install and properly align the inner clutch cover. Be
sure the fuel line, vent line and battery cables are
properly routed through the guard plate as shown
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
q
(engine side).
w
© Copyright Polaris Industries Inc.
.