Polaris RZR XP 1000 2014 Service Manual page 257

5. Press down on the top of the spider assembly,
pushing the spider onto the shaft. Remove snap ring
e
and slowly release the assembly.
6. Remove the spider assembly
NOTE
Spring is compression only and has no torsional wind.
7. Remove the inside spider plate
y
dampener . Inspect the spider dampener for wear
and replace if needed.
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
8. Remove the E-clips
9. Remove the clutch assembly from the holding tool.
r
and spring.
10. Press out the spring pins
11. Pull out the clutch roller pins
t
and spider
u
, washers
o
rollers . Inspect the rollers for wear; replace if worn.
a
in the inner sheave.
s
PVT SYSTEM
i
, and the clutch
5
d
and rollers .
5.31