Mitsubishi Electric MELSEC-A/QnA Series Handbook page 107

3
ANALOG OUTPUT MODULE REPLACEMENT
Between the I/O terminal and programmable controller power supply:
Between output channels: non-isolation
Between external power supply and analog output: transformer isolation
Between the I/O terminal and programmable controller power supply:
Between the I/O terminal and programmable controller power supply:
500VDC, 20M or more
(I/O assignment: intelligent 16 points)
(Sleeved solderless terminal cannot be used.)
Ripple, spike 500mV
Q64DAN
photocoupler isolation
500VAC, for 1 minute
16 points
18-point terminal block
2
0.3 to 0.75mm
R1.25-3
0.34A
24VDC +20%, -15%
or less
P-P
0.24A
2.5A, 260µs or less
0.20kg
: Compatible, : Partial change required, ×: Incompatible
Compatibility Precautions for replacement
The number of occupied I/O points
has changed to 16 points.
×
×
Wiring change is required.
×
3
- 30