Interface Attributes Of 10Base-T/100Base-Tx/1000Base-T-Rj45; Interface Attributes Of 100Base-Fx - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
C.1 Interface Attributes of 10Base-T/100Base-TX/1000Base-
T-RJ45
Table C-1
Table C-1 Interface attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45
Attributes
Connector type
Working mode
Cable specification
Frame format
Network protocol
C.2 Interface Attributes of 100Base-FX
Table C-2
Table C-2 Attributes of 100M SFP optical modules
Attributes
Transmission
distance
Center wavelength
Minimum
transmitting power
Maximum
transmitting power
Receiving
sensitivity
Overload power
Optical fiber type
Issue 01 (2012-11-07)
lists the interface attributes of 10Base-T/100Base-TX/1000Base-T-RJ45.
Description
RJ45
10M/100M/1000M auto-sensing and full-duplex
When the interface rate is 10 Mbit/s or 100 Mbit/s, Category 5
unshielded twisted pair (UTP) cable is recommended. When the
interface rate is 1000 Mbit/s, Super category 5 Shielded Twisted
Pair (STP) cable is recommended.
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the interface attributes of 100Base-FX.
Description
2 km
1310 nm
-19.0 dBm
-14.0 dBm
-30.0 dBm
-14.0 dBm
Multi-mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 km 40 km
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
-8.0 dBm 0 dBm
-31.0 dBm -37.0 dBm
-8.0 dBm -10.0 dBm
Single-mode Single-mode
C List of Interface Attributes
80 km
1550 nm
-5.0 dBm
0 dBm
-37.0 dBm
-10.0 dBm
Single-mode
154