Huawei Eudemon8000E Series Manual page 39

HUAWEI Eudemon8000E Firewall
Hardware Description
Interface Name
CF card interface
CTL-ETH-SFP interface
(1000MBase-X)
MGMT-ETH interface
(10M/100M/1000M
Base-TX auto-sensing)
Console interface
AUX interface
Interface Attributes
Table 2-17
Table 2-17 1000MBase-X-SFP interface attributes
Attribute
Connector type
Operation mode
Standard compliance
Cable specification
Table 2-18
Table 2-18 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Issue 01 (2012-11-07)
Connector Type
TYPE II
(compatible with
TYPE I)
SFP
RJ45
RJ45
RJ45
lists the 1000MBase-X-SFP interface attributes.
Description
SFP
1000M fiber
IEEE 802.3-2002
Single-mode or multi-mode fibers
lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-duplex mode
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended when the
interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is 1000
Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 E8000E-X16 Chassis Overview
Description
It is used to hold a CF card to store data files
as a massive storage device.
It is reserved for the use after capacity
expansion.
It connects to the NMS workstation and has
LINK and ACT indicators.
It connects to the console for on-site
configuration of the system.
It connects to the Modem for remote
maintenance through dialing.
29