Huawei Eudemon8000E Series Manual page 115

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 5-27 Interface attributes of the 1-port 10GBase LAN/WAN-XFP optical interface FPIC
Attribute
Connector type
Optical interface
attributes
Compliance
Frame format
Network protocol IP
Table 5-28 Attributes of 10G XFP optical modules
Attribute
Transmission
distance
Center
wavelength
Minimum
transmitting
optical power
Maximum
transmitting
optical power
Receiving
sensitivity
Overload optical
power
Optical fiber type
The 10G XFP multi-mode optical module supports two types of multi-mode optical fibers.
5-29
During the configuration, the length of the optical fiber cannot exceed the restriction on the
transmission distance. The optical fibers whose core diameter is 50 μm and module bandwidth
is 2000 Mhz x km are special are not delivered with the product. You can purchase the fibers as
required.
Issue 01 (2012-11-07)
Description
LC/PC
Complies with the selected XFP optical module. (For the attributes of
XFP modules, see
IEEE 802.3ae
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Description
0.3 km
850 nm
-7.3 dBm
-1.3 dBm
-7.5 dBm
-1.0 dBm
Multi-mode
shows the relationship among the fiber core, module bandwidth, and transmission distance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-28.)
10 km 40 km
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
-1.0 dBm 2.0 dBm
-11.0 dBm -15.0 dBm
0.5 dBm -1.0 dBm
Single-mode Single-mode
5 Boards
80 km
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
Single-mode
Table
105