Huawei Eudemon8000E Series Manual page 95

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 4-12 Interfaces on the MPUD and their uses
Interface Name
Eth0 (10M/100M/
1000M Base-TX
auto-sensing)
Console interface
AUX interface
CF card interface
Interface Attributes
Table 4-13
Table 4-13 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Table 4-14
Table 4-14 Console interface attributes
Attribute
Connector type
Operation mode
Issue 01 (2012-11-07)
Connector
Type
RJ45
RJ45
RJ45
TYPE II
standard
(compatible
with TYPE I
standard)
lists the attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interfaces.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-duplex mode
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended when the
interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is 1000
Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
It connects to the NMS workstation and has LINK and
ACT indicators.
It connects to the console for on-site configuration of
the system.
It connects to the Modem for remote maintenance
through dialing.
It is used to hold a CF card to store data files as a
massive storage device.
4 E8000E-X3 Chassis Overview
85