Huawei Eudemon8000E Series Manual page 71

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 3-16 Interfaces on the SRUA and their uses
Interface Name
USB interface
CF card interface
CTL-ETH-SFP interface
(1000MBase-X)
MGMT-ETH interface
(10M/100M/1000M
Base-TX auto-sensing)
Console interface
AUX interface
Interface Attributes
Table 3-17
Table 3-17 1000MBase-X-SFP interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Table 3-18
Table 3-18 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Issue 01 (2012-11-07)
Connector
Type
USB
TYPE II
(compatible
with TYPE I)
SFP
RJ45
RJ45
RJ45
lists the 1000MBase-X-SFP interface attributes.
Description
SFP
1000 M fiber
IEEE 802.3-2002
Single-mode or multi-mode fibers
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting full-duplex mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 E8000E-X8 Chassis Overview
Description
Not supported.
It is used to hold a CF card to store data files as
a massive storage device.
It is reserved for the use after capacity
expansion.
It connects to the NMS workstation and has
LINK and ACT indicators.
It connects to the console for on-site
configuration of the system.
It connects to the Modem for remote
maintenance through dialing.
61