Huawei Eudemon8000E Series Manual page 38

Hardware description
Table of Contents

Advertisement

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 2-15 Buttons and indicators on the panel of the MPUB
Indicator/Button
OFL button
OFL indicator (red)
RUN indicator (green)
ALM indicator (red)
ACT active/standby
indicator (green)
Reset button
CF ACT indicator (green) If the indicator is on, the CF is in position.
CF OFL button
SFP LINK/ACT indicator
(green)
MGMT-ETH LINK
indicator (green) (on
Ethernet network
interfaces)
MGMT-ETH ACT
indicator (amber) (on
Ethernet interfaces)
Table 2-16
Table 2-16 Interfaces on the MPUB and their uses
Interface Name
USB interface
Issue 01 (2012-11-07)
Description
To remove a board, you must press and hold the button for six
seconds until the OFL indicator turns on.
This button takes effect only on the slave MPUB.
If the indicator is on, you can remove the board.
If the indicator blinks once every two seconds (0.5 Hz), the
system is in the normal state.
If the indicator blinks twice each second (2 Hz), the system is in
the alarm state.
If the indicator is steady on, the system is in the alarm state.
If the indicator is steady off, the system is in the normal state.
If the indicator is steady on, the MPUB is in the active state.
If the indicator is off, the MPUB is in the standby state.
The button is used for resetting the MPUB. If you press the Reset
button, you can reset the MPUB.
If the indicator is blinking, data is being read or written.
If the indicator is off, the CF is not in position or can be removed.
If you press the CF OFL button, all operations on the CF card
will be ended and the CF card will be powered off.
If the indicator is steady on, the link is normal.
If the indicator is blinking, data is being transmitted.
If the indicator is steady on, the link is normal.
If the indicator is off, the link is Down.
If the indicator is blinking, data is being transmitted.
If the indicator is off, no data is being transmitted.
describes the interfaces on the MPUB and their uses.
Connector Type
USB
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 E8000E-X16 Chassis Overview
Description
Not supported.
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E8000e-x16E8000e-x8E8000e-x3V200r001c01

Table of Contents