Huawei Eudemon8000E Series Manual page 122

HUAWEI Eudemon8000E Firewall
Hardware Description
Figure 5-14 Panel appearance of the 1-port OC-192c/STM-64c POS-XFP FPIC
Table 5-39 Components on the panel of the 1-port OC-192c/STM-64c POS-XFP FPIC
Component
STATUS (Green)
LINK/ACT
(Green)
Interface Attributes
Table 5-40
Table 5-40 Interface attributes of the 1-port OC-192c/STM-64c POS-XFP FPIC
Attribute
Connector type
Optical interface
attributes
Working mode
Compliance
Issue 01 (2012-11-07)
Description
If the indicator blinks once every 2s (0.5 Hz), the system is normal.
If the indicator blinks twice every 1s (2 Hz), the system is in alarm mode.
When the indicator is on, it indicates that the link is connected.
If the indicator is blinking, data is being transmitted.
When the indicator is off, it indicates that the link is disconnected.
shows the interface attributes of the 1-port OC-192c/STM-64c POS-XFP FPIC.
Description
LC/PC
Complies with the selected XFP optical module. (For the attributes of
XFP modules, see
Full duplex
STM-64c SDH/OC-192c SONET and RFC 2615 (1619)/1662
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-41.)
5 Boards
112