Huawei Eudemon8000E Series Manual page 101

HUAWEI Eudemon8000E Firewall
Hardware Description
The LPUF-40-A backplane does not support the hot swap of FPICs.
Figure 5-4
Figure 5-4 Appearance of the LPUF-40-A
Panel
Figure 5-5
the panel.
Figure 5-5 Panel appearance of the LPUF-40-A
Table 5-4 Indicators and button on the panel of the LPUF-40-A
Indicator/Button
OFL button
OFL indicator (red)
RUN indicator
(green)
Issue 01 (2012-11-07)
CAUTION
shows the appearance of the LPUF-40-A.
describes the panel appearance of the LPUF-40-A.
Description
It is a button to send a application signal to the device when removing
a board. Before removing a board, you need to press and hold the
OFL button for about 6s till the OFL indicator is on.
If the indicator is on, you can remove the board.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-4 lists the indicators on
5 Boards
91