Sfu Indicators; Indicators Of E8000E-X3; Fan Module Indicators - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Indicator/
Button
CF OFL button
SFP LINK/ACT
indicator (green)
MGMT-ETH
LINK indicator
(green) (on
Ethernet
interfaces)
MGMT-ETH
ACT indicator
(amber) (on
Ethernet network
interfaces)
A.2.4 SFU Indicators
Table A-8
Table A-8 Buttons and indicators on the panel of the SFU
LED
RUN
(green)
ACT
(green)
OFL (red)
A.3 Indicators of E8000E-X3
This chapter presents the indicators of E8000E-X3.
A.3.1 Fan Module Indicators
Table A-9
Issue 01 (2012-11-07)
Description
If you press the CF OFL button, all operations on the CF card will be
ended and the CF card will be powered off.
If the indicator is steady on, it indicates that the link is normal.
If the indicator is blinking, it indicates that data is being transmitted.
If the indicator is steady on, it indicates that the link is normal.
If the indicator is off, it indicates that the link is down.
If the indicator is blinking, it indicates that data is being transmitted.
If the indicator is off, it indicates that no data is being transmitted.
lists the status and descriptions of SFU indicators.
Description
Before the registration of the SFU: If the indicator blinks twice every second (2
Hz), it indicates that the system is in the alarm state.
After the registration of the SFU: If the indicator blinks once every two seconds
(0.5 Hz), it indicates that the system runs normally.
If the indicator is on, it indicates that the SFU works normally; if the green
indicator is off, it indicates that the SFU is faulty.
When the SFU works normally, the OFL indicator is off. After the OFL button
is pressed to power off the SFU, the OFL indicator is on.
shows the status and description of the indicators.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A List of Indicators
145