Sfu Indicators - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Table A-3 Buttons and indicators on the panel of the MPUB
Indicator/Button
OFL button
OFL indicator (red)
RUN indicator (green)
ALM indicator (red)
ACT active/standby
indicator (green)
Reset button
CF ACT indicator (green) If the indicator is on, it indicates that the CF is in position.
CF OFL button
SFP LINK/ACT indicator
(green)
MGMT-ETH LINK
indicator (green) (on
Ethernet network
interfaces)
MGMT-ETH ACT
indicator (amber) (on
Ethernet interfaces)
A.1.4 SFU Indicators
Issue 01 (2012-11-07)
Description
To remove a board, you must hold the button for six seconds until
the OFL indicator turns on.
This button takes effect only on the slave MPUB.
If the indicator is on, it indicates that you can remove the board.
If the indicator blinks once every two seconds (0.5 Hz), it
indicates that the system is in the normal state.
If the indicator blinks twice each second (2 Hz), it indicates that
the system is in the alarm state.
If the indicator is steady on, it indicates that the system is in the
alarm state.
If the indicator is steady off, it indicates that the system is in the
normal state.
If the indicator is steady on, it indicates that the MPUB is in the
active state.
If the indicator is off, it indicates that the MPUB is in the standby
state.
The button is used for resetting the MPUB. If you press the Reset
button, you can reset the MPUB.
If the indicator is blinking, it indicates that data is being read or
written.
If the indicator is off, it indicates that the CF is not in position or
can be removed.
If you press the CF OFL button, all operations on the CF card
will be ended and the CF card will be powered off.
If the indicator is steady on, it indicates that the link is normal.
If the indicator is blinking, it indicates that data is being
transmitted.
If the indicator is steady on, it indicates that the link is normal.
If the indicator is off, it indicates that the link is down.
If the indicator is blinking, it indicates that data is being
transmitted.
If the indicator is off, it indicates that no data is being transmitted.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A List of Indicators
142