Huawei Eudemon8000E Series Manual page 109

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 5-18 Indicators on the panel of the 4-port 10GBase LAN/WAN-XFP FPIC
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 5-19
If you configure 10 GE interface to work in WAN mode, use single-mode optical fibers to
connect devices.
Table 5-19 Interface attributes of the 4-port 10GBase LAN/WAN-XFP FPIC
Attributes
Connector type
Optical
interface
attributes
Frame format
Network
protocol
Table 5-20 Attributes of 10G XFP optical modules
Attributes
Maximum
transmission
distance
Issue 01 (2012-11-07)
Description
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
If the indicator blinks twice every 1s (2 Hz), the LPU is in the alarm
state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
lists the interface attributes of the 4-port 10GBase LAN/WAN-XFP FPIC.
CAUTION
Description
LC/PC
Compliant with the selected XFP optical module.(for the attributes of XFP
modules, see
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 5-20)
10 km 40 km 80 km
5 Boards
99